Archive | Home RSS feed for this section

DIY Linen jewelry pin-board

11 Apr

I’ve been m.i.a. over the past week because I’ve been trying to get a few projects finished around here.  You know, projects that I was interested in for about 10 minutes, projects that have been going on so long I have to take frequent brakes to keep from going insane (the basement), projects I was *this close* to finishing when I ran out of some item I needed to get the job done and couldn’t find exactly what I needed… anywhere… to match what I was already using (GRRRRR).

My linen covered jewelry pin-board falls in the latter category…

This is a super-duper easy project to do, you could do it with a spare hour (or less!) if you have all of the materials.  Also, it is really nothing more than an upholstered message board, I’ve just left off the crisscrossed ribbon, and replaced tacks with extra-long pink pearl pins ~ corsage pins work awesome, too ~ you can find either at your local fabric or craft store.

I started with a once awesome, but now fruit punch stained cream colored linen table cloth (the fruit punch stain has been circled so you can see it in all of it’s glory…).  I love repurposing things, so I was happy to have this as a starting point.

Found a perfect piece of 3/4″ plywood in the garage (it’s pretty big!) and some batting left over from a previous project (I had this laying around, but you could use mdf, homasote – which is good for pinning, or thinner plywood)

I Liberated some cork tiles that I’d bought years ago intending on using them for something else (I had to purchase one additional pack of cork tiles due to the size of the board I was using. You can also buy cork in rolls)

Other items I used: Scotch brand Super 77 spray adhesive (love this stuff), cream colored single fold bias tape, silver *tortoise shell* upholstery tacks, staple gun/10mm staples, craft paper and masking tape (to finish the back nicely) and flush-mount wall hooks.

Here’s how you do it:

1) Lay out the cork tiles (or cork roll) on the plywood. Use the spray adhesive (lightly) to stick the cork to the board (you’ll want to do this so you can pick it up/move it around to staple on the batting), trimming the cork to size

2) Lay batting over the cork.  Staple batting to the plywood all around the outside edge (you can wrap it all the way around to the back, but this will make the back fluffier as you lay the fabric on top, so keep that in mind if you are going to use flush mount brackets – the thickness of your fabric/batting may keep your brackets from reaching the brackets on the wall).

3) Lay fabric on top of batting/cork/plywood. wrap around the back and staple.  I was very happy to see that the board was the perfect size to miss that fruit-punch stain (in the circle) lol…

4) Flip face down and roll out craft paper on the back.  Use the spray adhesive to lightly adhere the paper to the back.  Use masking tape all around the perimeter of the paper to create a clean finished back.  This isn’t necessary, of course, but it only takes a minute.  The Dollar Tree sells 3M brown craft/post paper rolls for $1. (I buy several at a time, use them for wrapping paper, as a “drop cloth”/surface protector for small paint projects, etc.)

5) Using upholstery tacks, tack bias tape all around the edges (you could also skip the bias tape and just use the tacks.  Or you could skip this step altogether).  You’ll want to make sure that your tacks are evenly spaced so using something of desired size as a *spacer* put it in between tacks and tap tacks in only half way (this will allow you to measure from shank to shank, making your spaces more even).  Once you have an entire line of “half-in”, evenly spaced tacks, go back and tap them all in.  Please note my very fancy spacer…

6) Install brackets on both the wall and back of the pin-board if you are going to hang it on the wall.  I used flush mount brackets and careful measuring was essential.

7) Check for level

(okay, yeah, I added that because, I mean, I had to pat myself on the back for that one lol….)

…. And that’s it!

I went from this mess:

To this (with room to grow!)  Peep the old school green bathroom tiles and that 1968 radiant floor heat controller (the heat still works, by the way, but I don’t use it. I can’t imagine it’s *energy star approved* haha).  Yeah, you know you’re jealous lol…

I love these pink pearlized pins 🙂

What I learned:

i) Make sure you measure accurately to determine how many upholstery tacks you need.  I ran out 4/5 of the way through and couldn’t find the same tacks for miles!  I drove all over town (and all over the next town, too!) and finally found some at my local Ace Hardware (on Harding Pike in West Meade ~ you guys rock!).  Now I know to go there first lol, but that actually set me back a couple of days…

ii) Flush mount picture hangers require absolute accuracy.  When I put the hanger on the back of the pin board I was a nano-hair off (yes, “nano-hair” is a proper measurement!) and I spent ages up on a ladder with an incredibly heavy, cumbersome board trying to hang it while not being able to see the mounting hardware.  I was sweating – and cursing – and scratching up the wall for 10 minutes when I finally decided to re-measure and discovered I was off by 2 centimeters.  2 CENTIMETERS.  I had to remove and re-attach the bracket with all of the measuring, leveling, blah blah blah…  Very annoying…

iii) This project would work GREAT in a walk in closet lol.  Unfortunately, I don’t have one of those.  It would also work well over a dresser or dressing table, but my tv’s over the dresser and I don’t have space for a dressing table.  If you’re esthetically… um… affected… like I am – and I know you are – having all of that jewelry hanging around in a space as small as my bathroom happens to be, just might make you a little crazy.  I’m still trying to get used to it.  I LOVE being able to grab my jewelry and go (it actually saves me time when getting ready), and I’m wearing stuff now that I had forgotten about!  But with all my fab (!) green tile I had managed to create a calming space using all cream *everything else* and the jewelry adds texture and color that I guess I hadn’t really considered.

xx and oo’s

Advertisements

Interiors I Love: “Wide open spaces” feature, House Beautiful April 2011

31 Mar

Designer: Myra Hoefer

All white walls and white (rafter exposed) ceilings.  Check.

Completely open floor plan.  Check.

Massive linen covered sofas.  (oooh!) Check.

Hulking, gi-normous iron orb chandelier over the dining table.  (aaah!) Check.

Beer can butterflies.  Check.

… wait, what?

Yeah, you read that right, beer can butterflies.

Because really, and my late husband would definitely agree with me on this, a house isn’t truly a home until discarded PBR cans have been integrated into the design.

And let me tell you, I gave out a little squeak when I saw them.  And then I straight up squealed when I saw they were made out of beer cans.  How can I be DOWN?!  Thanks to artist Paul Villinski my late love’s redneck fantasies and my quest for fabulosity have been brought together AT LAST!  I just wish he could have been here to see it.  Sigh…  But I digress

Designer Myra Hoefer has truly created one of those interiors that, when I saw it, made me want to go home and throw away everything I own.  Ev-er-y-thing.  But I managed to contain myself.  I just try to satisfy the urge by looking at the feature over and over and over and……

Anywho, to see this amazing home, pick up the April copy of House Beautiful (you won’t be disappointed).  In the mean time, Myra did have some pdf’s on her website, here are a few:

 

 

… And then, after a little snooping around, I found photos of Myra Hoefer’s shop in Sonoma:

 

Super-swoooooon!  If I ever find myself in Sonoma, I’m making a bee-line for that store.  In the mean time, you’ll find me roaming around Home Depot looking for just the right solution for hanging my upholstered jewelry hanger-thingy (“how-to” post coming in the next day or so… as soon as I can get the dang thang up on the wall haha).

xx and oo’s

Re-use, recycle: Our former living room lives on

30 Mar

It’s a rainy day here in Nashville, and after a long, colder than usual winter, I can’t help but think about California.  And oftentimes when I think about California, I think of the home we left behind there.

I had a love/hate relationship with that house.

Loved it because it really was beautiful, especially that view from the back yard!  We dreamed dreams of growing old in that house, having friends over for beers and bbqs, we talked about our kids having their friends over for swimming in the summer, and all the space we had there for lots of family visits.  So many wonderful thoughts and memories…

Hated it because it’s where our family lost the most.  Hated it because all of our dreams shriveled up and blew away while living in that house.  Hated it because my husband died while trying to get home to us in that house.  So much sorrow.  So much negativity and pain…

This rainy afternoon while looking at pictures on my computer, I came across photos of that house.  A friend of mine graciously  took photos of the house when I listed it for sale, so there are quite a few.  When I came across some pics of the living room, the thought occurred to me that although the living room in the new house is very different than the old house, all of the items from the old room live on – they’ve all been given a fresh role, or even completely reinvented and used in different places in the new house.  I kept staring at the picture of the old living room, pondering “where are they now”, trying to recall where all of those items that danced together nicely in our former home, are being used now.  And this is what I noted (you can click the pic to enlarge):

Photo: Jewell Green

 

Photo: Jewell Green

 

 

So there you have it.  I guess my furniture and accessories really are a reflection of me: all being given a second chance in a new place, learning to get along in their new surroundings.  We’re all experiencing a little… Evolution….

Oh, and in case you’re wondering, this is what the living room looks like in our new house in Nashville.  It’s totally still a *work in progress* (I need to re-do those wing chairs, do something about that cabinet under the dining area window, I’d love to add some more seating, etc., etc…).  Although my style has definitely changed, as you can see I don’t tend to stray too far from beige lol (I love my calming neutrals!) and I’m happy to mix expensive with bargain basement in my home as easily as I will rock a Target blouse and a pair of Jimmy Choo’s….

 

Yes, that’s an Oly Studio “Pipa” bowl chandelier over the dining table – it’s one of my prized possessions 🙂  It was a big investment… well, for me… for a dang light lol, but I haven’t regretted it for a minute (I bought it from Jamie Beckwith of Beckwith Interiors here in Nashville).  The fittings were originally shiny brass though, so I sprayed them an oil rubbed bronze color to make it more in keeping with my decor.  The sofa is the Liam” by Mitchell Gold+Bob Williams.  I’ve paired it with a coffee table that is reminiscent of the Oly “Meri” table – only mine came from Z-Gallerie.  It was on clearance for $300, the manager agreed to knock 50% off THAT price.  Yep, I *stole* it for $150, and it’s smaller in scale, which I needed to fit the space.

The mirror and buffet were in the dining room at the old house, but this house has a smaller dining space than the last, so they have a new home in the living room. I think they work great there!  I bought the buffet at “Out of The Closet” in L.A. for $100.  When I got it home I saw that it was Drexel Heritage.  I love it when that happens!  I painted it white, and when we moved here I added those cool drapery tassels from West Elm – Voila!  The lamps, étagère and horse came from Home Goods (man, I LOVE that place!).  The horse was originally all one color – very light gray concrete.  I painted it to look like a vintage piece.  I broke the door off that big lantern, so I filled it with crystal and mercury glass taper holders with fab metallic tapers and still use it anyway!  Though, someone should probably climb in that picture and straighten up the candle that’s fallen over :-/

Anyway…  Until next time, you can find me in the basement slappin paint on somethin’ lol…

xx and oo’s

 

 

 

P.S.: Here’s that view I mentioned earlier from the back yard of the old house.  Ooh, and you can check out a snippet of my good friend Jewell Green’s work on her website:

Photo: Jewell Green

 

Photo: Jewell Green

 

My big, fat basement project: Episode #1, “Floor painting”

27 Mar

In my introduction to “My big fat basement project” I mentioned the first part of the project, which was painting the basement floor.  This was done mainly because a) the existing floor was in perfectly fine shape, it was just… well… ugly and b) I really couldn’t afford to do anything else to resolve the issue outlined in “a”.  I was quite hesitant about doing this because the space is nearly 400 square feet and if I messed it up badly, or if the paint wouldn’t adhere, I would be forced to replace it, and that simply wasn’t financially feasible.

It was do or die time…

I went online and did LOTS of research – DIY sites, individual homeowner blogs – read lots of advice about “how to” and looked at LOTS of before and after photos.  Saw an equal amount of “you CAN’T do that” and “I’ve done this and it worked out great”.  It was pretty confusing, to tell you the truth.  Ultimately, though, I decided it could be done, and done well, and I could do it myself.

I chose Zinsser B.I.N. Shellac-based Primer (appropriately tinted), and Valspar Ultra Premium Latex Satin Porch Paint in the color “Safari Brown”, as I wanted a deep chocolatey-gray brown (it’s VERY dark).  I also decided that it was a good time to invest in a paint sprayer.  Not only would this save time (and my back!), but it would help ensure a beautiful, flawless finish, and I have lots of painting projects (including the wood portion of the front of my house), so I knew that a mid-priced sprayer would be a good investment.  I decided to go with the Graco Spraystation (I KNOW, if you’re a mom like me, it sounds like “Graco Playstation” lol).  It did a fantastic job and there was NO paint under my nails when I was done – LOOOOVE that!

**Side note: Getting the gallon of Zinsser primer tinted was a bit of a challenge.  “Outside” primer manufacturers (ie: Zinsser, et al) don’t leave enough room in their cans to add a lot of tint (as opposed to the store brand primers, who do since they want you to use/tint their primer with their paint).  In my case, because I was going from white to a color that was nearly black, it was important that the primer was tinted per Valspar’s recommendation.  Not doing this would have added at least one additional coat of paint.  At Lowe’s (where I bought the paint) they are not allowed to pour out any paint from the can to create the necessary space to add the tint (I begged but they wouldn’t budge.  Some nonsense about regulations or getting fired… blah blah blah *eye roll*…).  Finally I asked if they would just give me the additional tint necessary in a cup and I could add it myself at home, to which they obliged.  So, I ended up adding a small lidded container (they gave me the tint in a foam cup – I didn’t want to spill that in the Cadi!), a large paint bucket and a paint mixer attachment for my drill to the shopping list (they did not charge me for the additional tint).  When I got home, I dumped the gallon of primer along with the tint into that big paint bucket and used my shiny new mixing attachment to create primer perfection!

Let me tell you: Shellac-based primer is NO JOKE!  When they say “use in a well ventilated area”, they really mean it.  My basement happens to be a walk out, so there is a sliding door I was able to open, as well as opening the door that leads to the garage and opening the big garage door.  I even wore a mask – and it was still crazy-stinky!  If you have a traditional basement with no windows, I’m not entirely sure I would recommend this.  However, having a perfect opaque coat of primer after just ONE coat was well worth breathing in all those chemical fumes lol.  As much as this stuff hurt my lungs I LOVE it!  And it sticks to everything without sanding (I’ve used some of the left over primer to prime the laminate cabinets and the really fancy-pantsy royal blue laminate counter top down there – seriously, *eee-gads* sooo not fabulous – but that’s an entirely separate episode…)

Following the manufacturers instructions on the sprayer I did a viscosity test and found I didn’t need to thin the primer for use in the sprayer, however, getting it OUT of the sprayer took some doing.  Because the primer is shellac-based (and not water based like more commonly used Latex paint), when you get it wet, it coagulates and goes all rubbery.  I was able to successfully clean it with very hot water and Dawn dish detergent, but I had to take the gun completely apart IMMEDIATELY after use and use a wire brush to clean it (we’re talkin’ taking out all of the little bits inside the tip, etc. and scrubbing them clean).  But the primer was on beautifully with lightening fast speed (I had one of those “OMG! Why didn’t I get one of these sooner?!!” moments)

When it came time to paint on the Valspar Latex Porch Paint, I found that I did need to thin it for use in the sprayer.  For this I used Wagner Paint Easy Latex Paint Conditioner (recommended by the *paint guy* at Lowe’s).  You can thin paint by the gallon, so that’s what I did so it would make filling up the sprayer container faster while I was working.

One coat of primer and two coats of porch paint later, and my entire basement looked like a big, delicious, magnificent Hershey’s candy bar!  I was so happy I poured myself a drink and did a dance!  I was originally concerned that the pattern in the floor would bother me, but it doesn’t.  In fact, I think it adds wonderful interest to what would otherwise be a really plain slab-o-brown-floor!

I let it cure for a week before moving furniture down there.  It was kind of like torture, but I’m glad I put on my “patient” crown because I just know I would have managed to scratch that floor.  Incidentally one week after moving the furniture down there the sump pump failed during heavy rain.  We don’t talk about that day (shivers), I’m just grateful I discovered it when I did because otherwise it could have been a lot worse – it turned out to be a failed electrical socket and my pump has no backup (Hey, I’m from L.A. we don’t have basements – or rain lol – so there is a wet weather/basement learning curve going on, mkay?).  Since I had to use chemicals down there to clean in order to get the *stinkies* out, I did end up messing up bits of the floor that just weren’t ready for chemicals yet. 😦  A little touch up here and there and everything was good as gold again, though.  All’s well that ends well….

I did the previously mentioned 7/8’s of the floor before I started this blog, so now, unfortunately there is furniture and rugs down there covering a large portion of the floor space, but here are a few pics to help you get the idea:

Lovely blue and white (and rusty!) vinyl floor, your days are numbered...

Having the primer tinted that dark really helped speed up the process, and meant fewer coats of Latex paint. That's ONE coat of primer!

The contrast between the floor *before* and the painted floor *after*. I used one coat of primer and 2 coats of paint.

The finished floor (or a slice that doesn't have a rug or furniture on it!). Now, doesn't it make you want to run and get a chocolate candy bar?

 

What I learned and now pass on to you:

1) Take your time when *taping off* (top, bottom, seams in between sheets of plastic/canvas/whatever you’re using).  When you spray, the fine mist will get in to places paint wouldn’t if you were brushing it on.  You don’t want to remove the plastic and discover you painted half the wall by accident (boo!).

2) Make sure if you’re going much darker that you tint your primer per manufacturers instructions.  It’ll cut down your painting time, and save money on paint.

3) Make sure your primer is tinted properly!  They didn’t actually tell me they couldn’t tint it, I figured out when I looked at the paint “blot” they put on the lid, which didn’t look tinted at all – it was barely off-white.  Since it didn’t look right, I asked questions and found out about the lack of space in the can, etc., that I mentioned in the *side note*. When I tinted it at home using the rest of the tint, it was waaaaay darker than what they tried to send me out the door with.  If something doesn’t seem right, don’t be afraid to ask questions!

4) If you’re going to do large sections of floor, invest in a sprayer.  You’ll thank me later (after you’ve forgotten all about the overtime you had to work to pay for it lol).

5) Shellac based anything requires lots of ventilation!  Remember to work safe.

6) If you think it can be done, it probably can.  Often products made for one application can be easily adapted for use in another (blush as eye shadow, anyone?).  Do your research and find a way!

7) Most importantly ~ Don’t be afraid!  Kick off your stilettos, grab an old t-shirt and get to work… YOU CAN DO IT!

Until next time…

xx and oo’s

My big, fat basement project

26 Mar

(cue “Halloween” theme music)

Many of you have one.

Some of you have tackled yours.

Some of you lock the door and refuse to “go down there“.

Some are dark and damp and smelly.

Some are full of junk, yesterday’s castoff’s…  Someone else’s long forgotten favorite toys/clothes/chair…

Yeah, I’m talking ’bout basements.

I have one.  And I’ve been battling it (off and on) since last November.

You see, I’m a project “starter”.  A great and heroic “leader” of the charge.  A natural delegator.  I’m not a good “closer”, finisher, wrapper-upper of things.  Especially tiresome, tedious things that require heavy lifting and smelly, shellac-based liquids…

Now I’m good at the follow through if it’s something I can finish in one fell swoop, as it were.  But things that require doing, waiting, then doing some more, you’ll often lose me during the “waiting” period – especially if there is more than one “waiting” period (do… wait… do… wait some more… do some more… wait – ooooh look at the pretty butterfliiiiies…..).

So that brings me back to my *big fat basement project*.

I’m blogging about it, honestly, in an attempt to actually try to stay on track with it.  I’ve now been working on it for 4 months and it’s nowhere neeear finished.  Hopefully by putting it all out here and posting about it regularly, bit by bit, it will keep me focused on actually completing the project, which is to be my new office space.  Not having it finished is keeping me from moving forward with other business projects, so, dragging my feet on this has really affected me beyond just the issue of *aesthetics* (which, trust me, is HUGE).

What have I actually managed to get done?

So far I’ve painted 7/8 of the floor.

Yeah, 7/8 lol.  Here’s why:

There was furniture downstairs there that was going to be moved upstairs in to the space that I was using as my office.  My office furniture would then be moved downstairs to the basement.  Unfortunately, there was no space in the office to have both sets of furniture, and, since my single car garage is choc-o-bloc full of, well, crap, the stuff couldn’t go out there, either.  So it had to stay down in the basement and get shuffled around as I tried to get the floor done.  The last little slice of floor that was holding the massive pile of furniture never got painted – even though I originally began painting the floor back in November and the furniture that was there was moved long ago now…

And floor painting was the first and most essential part of the project.  My basement had horrible blue and white vinyl flooring.  It was in good condition – no splits or lifting – but it was uuuuuugly!  New flooring wasn’t really in my budget – frankly re-doing the basement wasn’t in my budget lol – so I got resourceful and figured out how to paint it….

Here’s a photo of the basement “before”.  Note that this picture was from the previous home owners (I would NEVER put anything in my home with UT on it haha!).  Once I moved in it was just full of junk.  Unfortunately it’s the only photo I have and I had to pull it from a really bad PDF, but you can still see all of its ugly shining through lol….

So *not* fabulous 😦

I will tell you all about my adventures in floor painting in my next post (this one’s already too long).  And I will tell you all about counter painting… and cabinet refinishing… and free rugs (yep, I said FREE)… and carpet removal (yucky stair carpet!) and all of my other fun (and cheap!) DIY and decorating adventures in future posts.  Ooh, and tips and tricks are welcome and greatly ENCOURAGED (I’ll take all the help I can get)!

I’m looking forward to having you along on my journey to complete my *big fat basement project*!

xx and oo’s

Bargain orchids? Oh yeah!

25 Mar

Wednesday I tweeted about finding orchids at Kroger here in Nashville (Belle Meade location) for $9.99.

Yes, you heard that right: $9.99!!

Having moved here from California, it was startling to me to see how much orchids cost here, I assume they are priced so high because they aren’t grown here and have to be shipped in.  I’ve bought them at Whole Foods before, however, I still find theirs are priced fairly high as well (though, for the record, when I checked a local florist I almost fainted when they quoted me the price of $40 each stalk.  I was even more shocked as they carried on trying to  justify the price which, really, was going in one of my ears and out the other.  Anywho…).  Like my blog title says, I’ve got champagne taste on a beer budget, so I’ve kind of made a mission of finding reasonably priced, decent quality orchids.  And Kroger comes through every time.

I’ve bought orchids there many times now, and I’ve never been disappointed.  The most I’ve ever spent there was $14.99 and the orchids are usually either medium/large (not *giant*, but large enough), or medium double stalked.  I can always find plants with many unopened blooms, and have never had problems with blooms, um, blooming (is there anything more annoying than the unopened blooms dying and falling off the stalk?).

I was actually going to Kroger hoping the orchids would be $12.99, like they were the last time I bought one there.  Well, imagine my surprise when I saw the sign saying $9.99!  Yeah, they come in plastic pots, but you’re going to take them home and put them in your own fab containers anyway, right?  Here are some pics of the orchids I bought:

The stalk on the left is actually a lot longer than it looks in this pic (must tighten up my photog skills!)

 

This one is actually fairly tall, I got there early and had my pick!

This one is in the front entry. It's a tall single stalk with two branches. I've just completed a project in there I'll be posting soon (I'm still styling)!

I’m no expert, but take pretty decent care of my orchids – putting them in a bright room, but not in direct sunlight, and popping 2-3 ice cubes in the pot once per week during the winter – yep, that’s all the watering they need (you can over water them, which will shorten their bloom/life).  They’ve all lasted fairly well – I’m finding the blooms last 8-10 weeks.  Yes, they can live longer, but I don’t think a couple of weeks is enough to justify paying 2-3 times the price.  Just make sure that when you buy them they aren’t “blown” (all the flowers in bloom).

Quite frankly, though they look very impressive and elegant, they are one of the most cost effective flowers in my opinion, because they last so long, and they are much simpler than most people realize to take care of.

All this fabulousness.  And I got three for the price of (less than) one – YAY ME!

xx and oo’s

Interiors I love: Serendipity, Veranda April 2011

24 Mar
Designer: James Michael Howard

Designer: James Michael Howard

OMG!

I am in love with this house.

The April 2011 edition of Veranda features “Serendipity”, a beautiful home in Vedra Beach, Florida.  James Michael Howard was the interior designer and he, along with the home’s owners, Robert and Sallie Hart, created beauty.

Unfortunately Veranda doesn’t feature any of its current issue photos on the web site (boo!) so, you’ll have to pick up a copy to see the fabulosity that is this home….

I wanna marry this house and have its babies.  Since I can’t do that (double boo!), I will go to James Michael Howard’s website and drool over the photos of his other interiors.

Mr. Howard, you are a man after my own heart.

Sigh…

Now, where did I lay that paint brush…….?

%d bloggers like this: